Showroom machine

Including Delivery to UK Mainland
Commissioning by Felder Engineer
3 days Classroom Training at Felder UK
2 days Workshop Training

Serial Number 333.09.021.23

5 axes 15 kW main spindle
Cardanic 5 axes head that is attached via linear guides to the mounting plate of the Z-axis and vertically guided along 2 guides.
Interface on an HSK F63 cone,monitored by 3 sensors. Drilling, milling and saw processing at any angle required.
Connected load: 15kW (S6)
Speed: 1000-24000 rpm
Drive: 3 phase HF motor inverter controlled, rotates right/left, 1 compressed air connection, interface for aggregate, tooling
weight (rotating): 6kg max. tooling length 200mm, when processing a workpiece 250mm in thickness max. saw blade ¥ 250, bearings ceramic bearings, spindle cooling: liquid cooling

Working area:
X= 3740 mm
Y= 1570 mm
Z= 350 mm

Axis positioning speed:
X= 80 m/min
Y= 80 m/min
Z1= 30 m/min
Z2= 20m/min

6 workpiece supports: with middle and rear reference rows.

2 Machining areas for alternate operation.
One control pedal for the left-hand and one for the right-hand machining area.

Tool changer on left-hand machine stand with 12 tool positions for HSK F63

Disc changer with 24 tool positions mounted and onboard the outrigger. For HSK spindle moulder.

Vacuum pump_ rated capacity 90 mn/h

Safety fence to the left and the right of the machine

Chip removal system
Chip removal system for waste pieces and chippings.

LED positioning of consoles and vacuum pods H350 16.30

In addition to the rear and middle stop rows, a third stop row will be added on the front side. Therefore three stops are built in each individual console, which enables to reference 4 pieces in Y-direction

4 reinforced loading supports instead of the 4 standard supports

Vacuum system is enabled on each console 6 consoles to manually change the frame clamp to profile the inner and outer ides of the semicircular curved frame workpieces


Combined safety system consisting of bumper and light barrier.